CLE-LINE® is part of the Greenfield Industries family of quality cutting tools. Cle-Line® is a familiar name to users of quality cutting tools. Cle-Line® cutting tools have been manufactured for decades specifically for the construction, maintenance, repair, operating, and industrial markets. This catalog gives you all the tools you need to keep your industry working. A wide selection of high-quality drills, saw blades, taps, dies, and burs have been brought together to give you one complete resource for purchasing cutting tools. You can shop this catalog with confidence knowing the high standards of quality and service that come from Cle-Line®. Cle-Line® tools are sold exclusively through a network of industrial distributors. When you contact your distributor, request Cle-Line® for your everyday applications. Metalcutting Safety (read this before using Cle-Line® products) Modern metalcutting operations involve high energy, high spindle or cutter speeds, and high temperatures and cutting forces. Hot, flying chips may be projected from the workpiece during metal-cutting. Although advanced cutting tool materials are designed and manufactured to withstand the high cutting forces and temperatures that normally occur in these operations, they are susceptible to fragmenting in service, particularly if they are subjected to over-stress, severe impact or otherwise abused. Therefore, precautions should be taken to adequately protect workers, observers and equipment against hot, flying chips, fragmented cutting tools, broken work pieces or other similar projectiles. Machines should be fully guarded and personal protective equipment should be used at all times. When grinding advanced cutting tool materials, a suitable means for collection and disposal of dust, mist or sludge should be provided. Over-exposure to dust or mist containing metallic particles can be hazardous to one's health particularly if exposure continues over an extended period of time and may cause eye, skin, and mucous membrane irritation and temporary or permanent respiratory disease. Certain existing pulmonary and skin conditions may be aggravated by exposure to dust or mist. Adequate ventilation, respiratory protection and eye protection should be provided when grinding and workers should avoid breathing of and prolonged skin contact with dust or mist. General Industry Safety and Health Regulations, Part 1910, U.S. Department of Labor, published in Title 29 of the Code of Federal Regulations should be consulted. Obtain from Cle-Line® and read the applicable Safety Data Sheet before grinding. Cutting tools are only one part of the worker-machine-tool system. Many variables exist in machining operations, including the metal removal rate; the workpiece size, shape, strength and rigidity; the chucking and fixturing; the load carrying capability of centers; the cutter and spindle speed and torque limitations; the holder and boring bar overhang; the available power; and the condition of the tooling and the machine. A safe metalcutting operation must take all of these variables, and others, into consideration. Cle-Line® has no control over the end use of its products or the environment into which those products are placed. Cle- Line® urges that its customers adhere to the recommended standards of use of their metalcutting operations. The information included throughout this catalog under the heading “Technical Data” and other recommendations on machining practices referred to herein are only advisory in nature and do not constitute representations or warranties and are not necessarily appropriate for any particular work environment or application. WARNING: This product contains Cobalt and/or Nickel and/or Lead a chemical known to the state of California to cause cancer, or birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Magnified View - Please use mouse to move page for easier readability